Catalogue Triaxial - Triaxial automatique


Triaxial automatique

Ref.: S0220/SM

Fully Automated Four Pressure Triaxial System
All in one four pressure automated system for any kind of triaxial tests (TUU, TCU and TCD). It makes also possible to automatically perform permeability, consolidation and saturation tests.
The standard model has four pressure / volume maintainers that can be configured and controlled in a fully automated and independent way. 
You just have to configure the test with the desired parameters and the software will automatically proceed to saturate the sample. Once the sample is saturated, EDS Software will stop the system and inform you that the saturation process has finished. It will display sensor readings in graphs and calculate “B” coefficient in real time.
Consolidation as well as UU, CD and CU triaxial tests are fully automated.  Once consolidation is completed, you will be able to use the software to calculate the appropriate breaking velocity for the material that has been consolidated.
Pressure and volume maintainers will automatically keep the pressure value fixed during the test. 
All readings are graphed in real time during the test and stored in a database in the PC for later processing. If desired, you will be able to apply corrections related to membrane thickness, paper drains, etc.
Pressure maintainers. 
250cc Capacity.
20, 30 and 50 bar Models.
Entirely made of bronze.
Each maintainer has a sensor that informs the system about the pressure at that moment.
Software PID control makes possible to reach and maintain the fixed pressure set points.
Each pressure maintainer works in turn as a volume change device. 
Maintainers can be configured and used as: 
Lateral, confining or cell pressure
Back pressure.
Upper back pressure
Volume change device
EDS software
Multi-task control and data acquisition. You will be able to, for example, carry out a triaxial test and saturation at the same time, or both quick triaxial and a permeability tests.
Once the sample is in place and the test conditions are configured, the system will entirely perform the desired test (triaxial, consolidation, saturation or permeability) from beginning to end. The triaxial system is controlled by our leading-edge EDS A.I. software that automates permeability, saturation, consolidation (isotropic and anisotropic) and the triaxial test itself. 
The system is a compact and complete unit containing everything required to perform fully automated tests. Independent PID controls are used to accurately apply velocity and or pressure.
This system can be used with any triaxial apparatus. When used together with Proetisa’s Soilmatic Series Triaxial Machine the same software will select test velocity and any other parameter.
The standard frame test has a maximum load capacity of 50 kN. Higher capacity models are also available.
UNE 103402, ASTM D-4767, AASHTO T-297, COE EM 1110
The software application will allow you to open several windows at the same time displaying the different tests that are being carried out at that time.
Real time graphs with acquired data.
You will be able to activate or deactivate the sensors display without data loss.
You will be able to change graph units, for example: display values in bars, kg/cm2 or kPa, etc.
Likewise, it is possible to choose between linear or logarithmic time scales.
Graphs have an auto function that adjusts it to its real size. It is possible to zoom and enlarge areas of interest or change the way in which data are displayed, toggle between dots and lines, view minimum and maximum values, etc.
Virtual display with elapsed and remaining time.
Event configuration allowing the user to stop tests, accelerate data acquisition, activate alarms, etc.
Software makes it possible to define values in order to finish tests depending on force, strain, stroke, pressure, volume, etc.
You will be able to process and plot all the recorded data and print results in Word format or export data to Microsoft Excel.
Characteristics :
Pressure maintainers
•Capacity : 250cc
•20, 30 and 50 bar Models.
Dimensions: (L x W x H) 800 x 600 x 970 mm
Power supply: 220 V One phase. 50 Hz
Weight: 180 kg

Pág.página anterior1página siguiente
shopping cart neuf user inscrire

Quick support

Producción de Equipos Técnicos e Industriales
Producción de Equipos Técnicos e Industriales, S. A.
Carretera de Algete M-106, km. 4,100
28110 Algete - Madrid (España)
Tel.: 91 628 29 40 • Fax: 91 629 00 59