Catalogue SOILMATIC - Pressure / Volume maintainer - Type E

S0169_SM.pdf S0169_SMI.pdf

Pressure / volume maintainer - Soilmatic E - 1000 kPa

Ref.: S0169/SM10

Pressure / volume maintainer - Soilmatic E

Pressure range: 0 - 1MPa (0-10 bar)

Volume capacity: 230cc

Interface: Touchscreen or USB connection

The Proeti Pressure/Volume maintainer is a general-purpose water pressure source and volume change gauge for the precise regulation and measurement of fluid pressure and volume change. Available in one configuration, maximum pressure of 1000kPa and a volumetric capacity of 230cm3

The pressure / volume maintainer provides an extremely cost-effective replacement for conventional soil mechanics laboratory pressure sources and volume change gauges. It is ideal as a back pressure or cell pressure source where it can also measure the change in volume of the test specimen.

The unit does not require a supply of compressed air to function. Configured both with or without the touchscreen, the device can be controlled directly from a computer using its own full speed USB 2.0 / 3.0 interface.

The instrument is a constant pressure source which can replace traditional laboratory pressure sources such as mercury column, compressed air, pumped oil and dead weight devices. It is also a volume change gauge resolving to 1 mm3.

The reduced size compared to any other controller in the Proeti range makes it ideally suited for life in a commercial testing laboratory where bench space is usually at a premium. The pressure / volume maintanier automatically protects itself from pressure and volume over-ranges.

EDS software supplied allows full controller functionality to be accessed by means of the full speed USB 2.0 interface. The software allows the user to program “n” pressure steps that can be either incremental or decremental, this is very useful to program a saturation.

The instrument may also be controlled via the touchscreen without the need of a PC.

Technical features:

Pressure range: 0 - 1 MPa (0-10 bar)

Volumetric capacity: 230cc

Resolution of measurement - pressure/volumen: 0,1 KPa/1mm3

Accuracy of measurement:

Pressure <0,10% F.E.

Volume <0,3% meassured value with ± 100mm3

Closed-loop control of pressure (PID): ± 0,1KPa

Dimensions: 550 x 100 x 125 mm

Weight: 5,5 Kg (empty)

Power: 100-240VAC, 50-60Hz.

Ambient temperature range: +10°C .+30°C

User interface: Touchscreen (optional)

PC interface: USB 2.0 + EDS software

Maximum velocity: 0 mm3/s


Pressure / volumen maintainers can be used:


  • Pressure cell
  • Backpressure.
  • Volume change device.


  • Can be used as high precison volume change device. (0,014 mm3)
  • Can be used where a high precison pressure is needed
  • Can be used in research projetcs where a hydraulic gradient is needed.

Pág.página anterior1página siguiente
shopping cart neuf user inscrire

Quick support

Producción de Equipos Técnicos e Industriales
Producción de Equipos Técnicos e Industriales, S. A.
Carretera de Algete M-106, km. 4,100
28110 Algete - Madrid (España)
Tel.: 91 628 29 40 • Fax: 91 629 00 59